Double wire drawing machine / Single wire drawing machine:

Content:

  

Working machine

Draw two wires with one servo motor. This machine is suitable for forming copper bars or copper sheets of 33.5  mm size, aluminum bars and aluminum bars with a size of 4.5 K mm and then turning them into wires. ConsistsmachineDouble wire drawing from conical wire drawing machine, electric control system, wire spinning machine. 

Characteristics:

  1.  works

machine

Double wires are designed to minimize friction between the wire and the conical wire to avoid any scratching on the wire.2.  The double wire drawing machine is suitable for many non-ferrous metals. There is no need to change the wiring machineTo match the different materials used.

3.  Operates parts of the cone-shaped servo motor independently from each other, to ensure easy operation and performance.

4.  Reduce energy consumption by reducing the number of motors and automatically controlling the amount of energy produced to suit the port specifications.

5.  Ease of installation and switching templates.

6.  Small size structure and sophisticated design using the latest technological technology.

7.  hits maximum speed for wire drawing in fast wire machine 1800 m / min.

8.  Provide necessary spare parts and necessary technical support.

 

Measurements:

 

ModelMaterialsCompositionQatar towing device CapstanDiameter drawing reelThe entrance diameterQatar directorSpeed ​​drawingPower drive graphic drumQatar towing device Capstan 

FZL280
Copper, copper sheets, aluminum, aluminum sheets, ect
Horizontal type, integrated lubrication, one drive per reel drawing
ملم mm 280
ملم mm 280
Mm maximum 44
ملم mm 0.32 - 2.76
2000 m / min maximum
28 kW maximum
33 kW maximum

Size of the final copper wire (mm)0.40.60.81.02.02.6 

Speed ​​(m / min)
1900
1700
1400
1300
700
550-600

Working Conditions:

  1.  Equipping a coffee room, at a height of 4-5 meters minimum, to accommodate the size of the machine.

2.  Provide the necessary initial material.

3.  Provide qualified personnel to perform installation, operation and maintenance.

4.  A sophisticated system for rotating and discharging liquids.

5.  is used

machine

Double wire drawing with 15 ton (minimum) crane, steam generator and compressorAir, lubricating drawing wire, wire drawing mold, oil switch and heat exchanger.6.  require

machine

Double wire drawing is a constant amount of water, energy, and compressed air. 

Notes:

  1.  You must select the suitable machine for the nature of work.

2.  must be carried out daily to avoid machine damage.

3.  is considered

machine

Dual wire drawing is not suitable for use with aluminum or aluminum foil bars. 

Model:  

  In February 2015,  BBOWAY GROUP was installed

machine

Double wire drawing.